guix.texi

@example
guix copy --from=@var{host} libreoffice gimp
@end example

The SSH connection is established using the Guile-SSH client, which is
compatible with OpenSSH: it honors @file{~/.ssh/known_hosts} and
@file{~/.ssh/config}, and uses the SSH agent for authentication.

The key used to sign items that are sent must be accepted by the remote
machine.  Likewise, the key used by the remote machine to sign items you
are retrieving must be in @file{/etc/guix/acl} so it is accepted by your
own daemon.  @xref{Invoking guix archive}, for more information about
store item authentication.

The general syntax is:

@example
guix copy [--to=@var{spec}|--from=@var{spec}] @var{items}@dots{}
@end example

You must always specify one of the following options:

@table @code
@item --to=@var{spec}
@itemx --from=@var{spec}
Specify the host to send to or receive from.  @var{spec} must be an SSH
spec such as @code{example.org}, @code{charlie@@example.org}, or
@code{charlie@@example.org:2222}.
@end table

The @var{items} can be either package names, such as @code{gimp}, or
store items, such as @file{/gnu/store/@dots{}-idutils-4.6}.

When specifying the name of a package to send, it is first built if
needed, unless @option{--dry-run} was specified.  Common build options
are supported (@pxref{Common Build Options}).


@node Invoking guix container
@section Invoking @command{guix container}
@cindex container
@cindex @command{guix container}
@quotation Note
As of version @value{VERSION}, this tool is experimental.  The interface
is subject to radical change in the future.
@end quotation

The purpose of @command{guix container} is to manipulate processes
running within an isolated environment, commonly known as a
``container'', typically created by the @command{guix environment}
(@pxref{Invoking guix environment}) and @command{guix system container}
(@pxref{Invoking guix system}) commands.

The general syntax is:

@example
guix container @var{action} @var{options}@dots{}
@end example

@var{action} specifies the operation to perform with a container, and
@var{options} specifies the context-specific arguments for the action.

The following actions are available:

@table @code
@item exec
Execute a command within the context of a running container.

The syntax is:

@example
guix container exec @var{pid} @var{program} @var{arguments}@dots{}
@end example

@var{pid} specifies the process ID of the running container.
@var{program} specifies an executable file name within the root file
system of the container.  @var{arguments} are the additional options that
will be passed to @var{program}.

The following command launches an interactive login shell inside a
Guix system container, started by @command{guix system container}, and whose
process ID is 9001:

@example
guix container exec 9001 /run/current-system/profile/bin/bash --login
@end example

Note that the @var{pid} cannot be the parent process of a container.  It
must be PID 1 of the container or one of its child processes.

@end table

@node Invoking guix weather
@section Invoking @command{guix weather}

Occasionally you're grumpy because substitutes are lacking and you end
up building packages by yourself (@pxref{Substitutes}).  The
@command{guix weather} command reports on substitute availability on the
specified servers so you can have an idea of whether you'll be grumpy
today.  It can sometimes be useful info as a user, but it is primarily
useful to people running @command{guix publish} (@pxref{Invoking guix
publish}).

@cindex statistics, for substitutes
@cindex availability of substitutes
@cindex substitute availability
@cindex weather, substitute availability
Here's a sample run:

@example
$ guix weather --substitute-urls=https://guix.example.org
computing 5,872 package derivations for x86_64-linux...
looking for 6,128 store items on https://guix.example.org..
updating list of substitutes from 'https://guix.example.org'... 100.0%
https://guix.example.org
  43.4% substitutes available (2,658 out of 6,128)
  7,032.5 MiB of nars (compressed)
  19,824.2 MiB on disk (uncompressed)
  0.030 seconds per request (182.9 seconds in total)
  33.5 requests per second

  9.8% (342 out of 3,470) of the missing items are queued
  867 queued builds
      x86_64-linux: 518 (59.7%)
      i686-linux: 221 (25.5%)
      aarch64-linux: 128 (14.8%)
  build rate: 23.41 builds per hour
      x86_64-linux: 11.16 builds per hour
      i686-linux: 6.03 builds per hour
      aarch64-linux: 6.41 builds per hour
@end example

@cindex continuous integration, statistics
As you can see, it reports the fraction of all the packages for which
substitutes are available on the server---regardless of whether
substitutes are enabled, and regardless of whether this server's signing
key is authorized.  It also reports the size of the compressed archives
(``nars'') provided by the server, the size the corresponding store
items occupy in the store (assuming deduplication is turned off), and
the server's throughput.  The second part gives continuous integration
(CI) statistics, if the server supports it.  In addition, using the
@option{--coverage} option, @command{guix weather} can list ``important''
package substitutes missing on the server (see below).

To achieve that, @command{guix weather} queries over HTTP(S) meta-data
(@dfn{narinfos}) for all the relevant store items.  Like @command{guix
challenge}, it ignores signatures on those substitutes, which is
innocuous since the command only gathers statistics and cannot install
those substitutes.

The general syntax is:

@example
guix weather @var{options}@dots{} [@var{packages}@dots{}]
@end example

When @var{packages} is omitted, @command{guix weather} checks the availability
of substitutes for @emph{all} the packages, or for those specified with
@option{--manifest}; otherwise it only considers the specified packages.  It
is also possible to query specific system types with @option{--system}.
@command{guix weather} exits with a non-zero code when the fraction of
available substitutes is below 100%.

The available options are listed below.

@table @code
@item --substitute-urls=@var{urls}
@var{urls} is the space-separated list of substitute server URLs to
query.  When this option is omitted, the default set of substitute
servers is queried.

@item --system=@var{system}
@itemx -s @var{system}
Query substitutes for @var{system}---e.g., @code{aarch64-linux}.  This
option can be repeated, in which case @command{guix weather} will query
substitutes for several system types.

@item --manifest=@var{file}
Instead of querying substitutes for all the packages, only ask for those
specified in @var{file}.  @var{file} must contain a @dfn{manifest}, as
with the @code{-m} option of @command{guix package} (@pxref{Invoking
guix package}).

This option can be repeated several times, in which case the manifests
are concatenated.

@item --coverage[=@var{count}]
@itemx -c [@var{count}]
Report on substitute coverage for packages: list packages with at least
@var{count} dependents (zero by default) for which substitutes are
unavailable.  Dependent packages themselves are not listed: if @var{b} depends
on @var{a} and @var{a} has no substitutes, only @var{a} is listed, even though
@var{b} usually lacks substitutes as well.  The result looks like this:

@example
$ guix weather --substitute-urls=@value{SUBSTITUTE-URL} -c 10
computing 8,983 package derivations for x86_64-linux...
looking for 9,343 store items on @value{SUBSTITUTE-URL}...
updating substitutes from '@value{SUBSTITUTE-URL}'... 100.0%
@value{SUBSTITUTE-URL}
  64.7% substitutes available (6,047 out of 9,343)
@dots{}
2502 packages are missing from '@value{SUBSTITUTE-URL}' for 'x86_64-linux', among which:
    58  kcoreaddons@@5.49.0      /gnu/store/@dots{}-kcoreaddons-5.49.0
    46  qgpgme@@1.11.1           /gnu/store/@dots{}-qgpgme-1.11.1
    37  perl-http-cookiejar@@0.008  /gnu/store/@dots{}-perl-http-cookiejar-0.008
    @dots{}
@end example

What this example shows is that @code{kcoreaddons} and presumably the 58
packages that depend on it have no substitutes at @code{ci.guix.info};
likewise for @code{qgpgme} and the 46 packages that depend on it.

If you are a Guix developer, or if you are taking care of this build farm,
you'll probably want to have a closer look at these packages: they may simply
fail to build.

@item --display-missing
Display the list of store items for which substitutes are missing.
@end table

@node Invoking guix processes
@section Invoking @command{guix processes}

The @command{guix processes} command can be useful to developers and system
administrators, especially on multi-user machines and on build farms: it lists
the current sessions (connections to the daemon), as well as information about
the processes involved@footnote{Remote sessions, when @command{guix-daemon} is
started with @option{--listen} specifying a TCP endpoint, are @emph{not}
listed.}.  Here's an example of the information it returns:

@example
$ sudo guix processes
SessionPID: 19002
ClientPID: 19090
ClientCommand: guix environment --ad-hoc python

SessionPID: 19402
ClientPID: 19367
ClientCommand: guix publish -u guix-publish -p 3000 -C 9 @dots{}

SessionPID: 19444
ClientPID: 19419
ClientCommand: cuirass --cache-directory /var/cache/cuirass @dots{}
LockHeld: /gnu/store/@dots{}-perl-ipc-cmd-0.96.lock
LockHeld: /gnu/store/@dots{}-python-six-bootstrap-1.11.0.lock
LockHeld: /gnu/store/@dots{}-libjpeg-turbo-2.0.0.lock
ChildProcess: 20495: guix offload x86_64-linux 7200 1 28800
ChildProcess: 27733: guix offload x86_64-linux 7200 1 28800
ChildProcess: 27793: guix offload x86_64-linux 7200 1 28800
@end example

In this example we see that @command{guix-daemon} has three clients:
@command{guix environment}, @command{guix publish}, and the Cuirass continuous
integration tool; their process identifier (PID) is given by the
@code{ClientPID} field.  The @code{SessionPID} field gives the PID of the
@command{guix-daemon} sub-process of this particular session.

The @code{LockHeld} fields show which store items are currently locked by this
session, which corresponds to store items being built or substituted (the
@code{LockHeld} field is not displayed when @command{guix processes} is not
running as root).  Last, by looking at the @code{ChildProcess} field, we
understand that these three builds are being offloaded (@pxref{Daemon Offload
Setup}).

The output is in Recutils format so we can use the handy @command{recsel}
command to select sessions of interest (@pxref{Selection Expressions,,,
recutils, GNU recutils manual}).  As an example, the command shows the command
line and PID of the client that triggered the build of a Perl package:

@example
$ sudo guix processes | \
    recsel -p ClientPID,ClientCommand -e 'LockHeld ~ "perl"'
ClientPID: 19419
ClientCommand: cuirass --cache-directory /var/cache/cuirass @dots{}
@end example

@node System Configuration
@chapter System Configuration

@cindex system configuration
Guix System supports a consistent whole-system configuration
mechanism.  By that we mean that all aspects of the global system
configuration---such as the available system services, timezone and
locale settings, user accounts---are declared in a single place.  Such
a @dfn{system configuration} can be @dfn{instantiated}---i.e., effected.

One of the advantages of putting all the system configuration under the
control of Guix is that it supports transactional system upgrades, and
makes it possible to roll back to a previous system instantiation,
should something go wrong with the new one (@pxref{Features}).  Another
advantage is that it makes it easy to replicate the exact same configuration
across different machines, or at different points in time, without
having to resort to additional administration tools layered on top of
the own tools of the system.
@c Yes, we're talking of Puppet, Chef, & co. here.  ↑

This section describes this mechanism.  First we focus on the system
administrator's viewpoint---explaining how the system is configured and
instantiated.  Then we show how this mechanism can be extended, for
instance to support new system services.

@menu
* Using the Configuration System::  Customizing your GNU system.
* operating-system Reference::  Detail of operating-system declarations.
* File Systems::                Configuring file system mounts.
* Mapped Devices::              Block device extra processing.
* User Accounts::               Specifying user accounts.
* Keyboard Layout::             How the system interprets key strokes.
* Locales::                     Language and cultural convention settings.
* Services::                    Specifying system services.
* Setuid Programs::             Programs running with root privileges.
* X.509 Certificates::          Authenticating HTTPS servers.
* Name Service Switch::         Configuring libc's name service switch.
* Initial RAM Disk::            Linux-Libre bootstrapping.
* Bootloader Configuration::    Configuring the boot loader.
* Invoking guix system::        Instantiating a system configuration.
* Invoking guix deploy::        Deploying a system configuration to a remote host.
* Running Guix in a VM::        How to run Guix System in a virtual machine.
* Defining Services::           Adding new service definitions.
@end menu

@node Using the Configuration System
@section Using the Configuration System

The operating system is configured by providing an
@code{operating-system} declaration in a file that can then be passed to
the @command{guix system} command (@pxref{Invoking guix system}).  A
simple setup, with the default system services, the default Linux-Libre
kernel, initial RAM disk, and boot loader looks like this:

@findex operating-system
@lisp
@include os-config-bare-bones.texi
@end lisp

This example should be self-describing.  Some of the fields defined
above, such as @code{host-name} and @code{bootloader}, are mandatory.
Others, such as @code{packages} and @code{services}, can be omitted, in
which case they get a default value.

Below we discuss the effect of some of the most important fields
(@pxref{operating-system Reference}, for details about all the available
fields), and how to @dfn{instantiate} the operating system using
@command{guix system}.

@unnumberedsubsec Bootloader

@cindex legacy boot, on Intel machines
@cindex BIOS boot, on Intel machines
@cindex UEFI boot
@cindex EFI boot
The @code{bootloader} field describes the method that will be used to boot
your system.  Machines based on Intel processors can boot in ``legacy'' BIOS
mode, as in the example above.  However, more recent machines rely instead on
the @dfn{Unified Extensible Firmware Interface} (UEFI) to boot.  In that case,
the @code{bootloader} field should contain something along these lines:

@lisp
(bootloader-configuration
  (bootloader grub-efi-bootloader)
  (target "/boot/efi"))
@end lisp

@xref{Bootloader Configuration}, for more information on the available
configuration options.

@unnumberedsubsec Globally-Visible Packages

@vindex %base-packages
The @code{packages} field lists packages that will be globally visible
on the system, for all user accounts---i.e., in every user's @env{PATH}
environment variable---in addition to the per-user profiles
(@pxref{Invoking guix package}).  The @code{%base-packages} variable
provides all the tools one would expect for basic user and administrator
tasks---including the GNU Core Utilities, the GNU Networking Utilities,
the GNU Zile lightweight text editor, @command{find}, @command{grep},
etc.  The example above adds GNU@tie{}Screen to those,
taken from the @code{(gnu packages screen)}
module (@pxref{Package Modules}).  The
@code{(list package output)} syntax can be used to add a specific output
of a package:

@lisp
(use-modules (gnu packages))
(use-modules (gnu packages dns))

(operating-system
  ;; ...
  (packages (cons (list bind "utils")
                  %base-packages)))
@end lisp

@findex specification->package
Referring to packages by variable name, like @code{bind} above, has
the advantage of being unambiguous; it also allows typos and such to be
diagnosed right away as ``unbound variables''.  The downside is that one
needs to know which module defines which package, and to augment the
@code{use-package-modules} line accordingly.  To avoid that, one can use
the @code{specification->package} procedure of the @code{(gnu packages)}
module, which returns the best package for a given name or name and
version:

@lisp
(use-modules (gnu packages))

(operating-system
  ;; ...
  (packages (append (map specification->package
                         '("tcpdump" "htop" "gnupg@@2.0"))
                    %base-packages)))
@end lisp

@unnumberedsubsec System Services

@cindex services
@vindex %base-services
The @code{services} field lists @dfn{system services} to be made
available when the system starts (@pxref{Services}).
The @code{operating-system} declaration above specifies that, in
addition to the basic services, we want the OpenSSH secure shell
daemon listening on port 2222 (@pxref{Networking Services,
@code{openssh-service-type}}).  Under the hood,
@code{openssh-service-type} arranges so that @command{sshd} is started with the
right command-line options, possibly with supporting configuration files
generated as needed (@pxref{Defining Services}).

@cindex customization, of services
@findex modify-services
Occasionally, instead of using the base services as is, you will want to
customize them.  To do this, use @code{modify-services} (@pxref{Service
Reference, @code{modify-services}}) to modify the list.

For example, suppose you want to modify @code{guix-daemon} and Mingetty
(the console log-in) in the @code{%base-services} list (@pxref{Base
Services, @code{%base-services}}).  To do that, you can write the
following in your operating system declaration:

@lisp
(define %my-services
  ;; My very own list of services.
  (modify-services %base-services
    (guix-service-type config =>
                       (guix-configuration
                        (inherit config)
                        (use-substitutes? #f)
                        (extra-options '("--gc-keep-derivations"))))
    (mingetty-service-type config =>
                           (mingetty-configuration
                            (inherit config)))))

(operating-system
  ;; @dots{}
  (services %my-services))
@end lisp

This changes the configuration---i.e., the service parameters---of the
@code{guix-service-type} instance, and that of all the
@code{mingetty-service-type} instances in the @code{%base-services} list.
Observe how this is accomplished: first, we arrange for the original
configuration to be bound to the identifier @code{config} in the
@var{body}, and then we write the @var{body} so that it evaluates to the
desired configuration.  In particular, notice how we use @code{inherit}
to create a new configuration which has the same values as the old
configuration, but with a few modifications.

@cindex encrypted disk
The configuration for a typical ``desktop'' usage, with an encrypted
root partition, the X11 display
server, GNOME and Xfce (users can choose which of these desktop
environments to use at the log-in screen by pressing @kbd{F1}), network
management, power management, and more, would look like this:

@lisp
@include os-config-desktop.texi
@end lisp

A graphical system with a choice of lightweight window managers
instead of full-blown desktop environments would look like this:

@lisp
@include os-config-lightweight-desktop.texi
@end lisp

This example refers to the @file{/boot/efi} file system by its UUID,
@code{1234-ABCD}.  Replace this UUID with the right UUID on your system,
as returned by the @command{blkid} command.

@xref{Desktop Services}, for the exact list of services provided by
@code{%desktop-services}.  @xref{X.509 Certificates}, for background
information about the @code{nss-certs} package that is used here.

Again, @code{%desktop-services} is just a list of service objects.  If
you want to remove services from there, you can do so using the
procedures for list filtering (@pxref{SRFI-1 Filtering and
Partitioning,,, guile, GNU Guile Reference Manual}).  For instance, the
following expression returns a list that contains all the services in
@code{%desktop-services} minus the Avahi service:

@lisp
(remove (lambda (service)
          (eq? (service-kind service) avahi-service-type))
        %desktop-services)
@end lisp

@unnumberedsubsec Instantiating the System

Assuming the @code{operating-system} declaration
is stored in the @file{my-system-config.scm}
file, the @command{guix system reconfigure my-system-config.scm} command
instantiates that configuration, and makes it the default GRUB boot
entry (@pxref{Invoking guix system}).

The normal way to change the system configuration is by updating this
file and re-running @command{guix system reconfigure}.  One should never
have to touch files in @file{/etc} or to run commands that modify the
system state such as @command{useradd} or @command{grub-install}.  In
fact, you must avoid that since that would not only void your warranty
but also prevent you from rolling back to previous versions of your
system, should you ever need to.

@cindex roll-back, of the operating system
Speaking of roll-back, each time you run @command{guix system
reconfigure}, a new @dfn{generation} of the system is created---without
modifying or deleting previous generations.  Old system generations get
an entry in the bootloader boot menu, allowing you to boot them in case
something went wrong with the latest generation.  Reassuring, no?  The
@command{guix system list-generations} command lists the system
generations available on disk.  It is also possible to roll back the
system via the commands @command{guix system roll-back} and
@command{guix system switch-generation}.

Although the @command{guix system reconfigure} command will not modify
previous generations, you must take care when the current generation is not
the latest (e.g., after invoking @command{guix system roll-back}), since
the operation might overwrite a later generation (@pxref{Invoking guix
system}).

@unnumberedsubsec The Programming Interface

At the Scheme level, the bulk of an @code{operating-system} declaration
is instantiated with the following monadic procedure (@pxref{The Store
Monad}):

@deffn {Monadic Procedure} operating-system-derivation os
Return a derivation that builds @var{os}, an @code{operating-system}
object (@pxref{Derivations}).

The output of the derivation is a single directory that refers to all
the packages, configuration files, and other supporting files needed to
instantiate @var{os}.
@end deffn

This procedure is provided by the @code{(gnu system)} module.  Along
with @code{(gnu services)} (@pxref{Services}), this module contains the
guts of Guix System.  Make sure to visit it!


@node operating-system Reference
@section @code{operating-system} Reference

This section summarizes all the options available in
@code{operating-system} declarations (@pxref{Using the Configuration
System}).

@deftp {Data Type} operating-system
This is the data type representing an operating system configuration.
By that, we mean all the global system configuration, not per-user
configuration (@pxref{Using the Configuration System}).

@table @asis
@item @code{kernel} (default: @code{linux-libre})
The package object of the operating system kernel to
use@footnote{Currently only the Linux-libre kernel is fully supported.
Using GNU@tie{}mach with the GNU@tie{}Hurd is experimental and only
available when building a virtual machine disk image.}.

@cindex hurd
@item @code{hurd} (default: @code{#f})
The package object of the hurd to be started by the kernel.  When this
field is set, produce a GNU/Hurd operating system.  In that case,
@code{kernel} must also be set to the @code{gnumach} package---the
microkernel the Hurd runs on.

@quotation Warning
This feature is experimental and only supported for disk images.
@end quotation

@item @code{kernel-loadable-modules} (default: '())
A list of objects (usually packages) to collect loadable kernel modules
from--e.g. @code{(list ddcci-driver-linux)}.

@item @code{kernel-arguments} (default: @code{%default-kernel-arguments})
List of strings or gexps representing additional arguments to pass on
the command-line of the kernel---e.g., @code{("console=ttyS0")}.

@item @code{bootloader}
The system bootloader configuration object.  @xref{Bootloader Configuration}.

@item @code{label}
This is the label (a string) as it appears in the bootloader's menu entry.
The default label includes the kernel name and version.

@item @code{keyboard-layout} (default: @code{#f})
This field specifies the keyboard layout to use in the console.  It can be
either @code{#f}, in which case the default keyboard layout is used (usually
US English), or a @code{<keyboard-layout>} record.

This keyboard layout is in effect as soon as the kernel has booted.  For
instance, it is the keyboard layout in effect when you type a passphrase if
your root file system is on a @code{luks-device-mapping} mapped device
(@pxref{Mapped Devices}).

@quotation Note
This does @emph{not} specify the keyboard layout used by the bootloader, nor
that used by the graphical display server.  @xref{Bootloader Configuration},
for information on how to specify the bootloader's keyboard layout.  @xref{X
Window}, for information on how to specify the keyboard layout used by the X
Window System.
@end quotation

@item @code{initrd-modules} (default: @code{%base-initrd-modules})
@cindex initrd
@cindex initial RAM disk
The list of Linux kernel modules that need to be available in the
initial RAM disk.  @xref{Initial RAM Disk}.

@item @code{initrd} (default: @code{base-initrd})
A procedure that returns an initial RAM disk for the Linux
kernel.  This field is provided to support low-level customization and
should rarely be needed for casual use.  @xref{Initial RAM Disk}.

@item @code{firmware} (default: @code{%base-firmware})
@cindex firmware
List of firmware packages loadable by the operating system kernel.

The default includes firmware needed for Atheros- and Broadcom-based
WiFi devices (Linux-libre modules @code{ath9k} and @code{b43-open},
respectively).  @xref{Hardware Considerations}, for more info on
supported hardware.

@item @code{host-name}
The host name.

@item @code{hosts-file}
@cindex hosts file
A file-like object (@pxref{G-Expressions, file-like objects}) for use as
@file{/etc/hosts} (@pxref{Host Names,,, libc, The GNU C Library
Reference Manual}).  The default is a file with entries for
@code{localhost} and @var{host-name}.

@item @code{mapped-devices} (default: @code{'()})
A list of mapped devices.  @xref{Mapped Devices}.

@item @code{file-systems}
A list of file systems.  @xref{File Systems}.

@item @code{swap-devices} (default: @code{'()})
@cindex swap devices
A list of strings identifying devices or files to be used for ``swap
space'' (@pxref{Memory Concepts,,, libc, The GNU C Library Reference
Manual}).  For example, @code{'("/dev/sda3")} or @code{'("/swapfile")}.
It is possible to specify a swap file in a file system on a mapped
device, provided that the necessary device mapping and file system are
also specified.  @xref{Mapped Devices} and @ref{File Systems}.

@item @code{users} (default: @code{%base-user-accounts})
@itemx @code{groups} (default: @code{%base-groups})
List of user accounts and groups.  @xref{User Accounts}.

If the @code{users} list lacks a user account with UID@tie{}0, a
``root'' account with UID@tie{}0 is automatically added.

@item @code{skeletons} (default: @code{(default-skeletons)})
A list target file name/file-like object tuples (@pxref{G-Expressions,
file-like objects}).  These are the skeleton files that will be added to
the home directory of newly-created user accounts.

For instance, a valid value may look like this:

@lisp
`((".bashrc" ,(plain-file "bashrc" "echo Hello\n"))
  (".guile" ,(plain-file "guile"
                         "(use-modules (ice-9 readline))
                          (activate-readline)")))
@end lisp

@item @code{issue} (default: @code{%default-issue})
A string denoting the contents of the @file{/etc/issue} file, which is
displayed when users log in on a text console.

@item @code{packages} (default: @code{%base-packages})
The set of packages installed in the global profile, which is accessible
at @file{/run/current-system/profile}.

The default set includes core utilities and it is good practice to
install non-core utilities in user profiles (@pxref{Invoking guix
package}).

@item @code{timezone}
A timezone identifying string---e.g., @code{"Europe/Paris"}.

You can run the @command{tzselect} command to find out which timezone
string corresponds to your region.  Choosing an invalid timezone name
causes @command{guix system} to fail.

@item @code{locale} (default: @code{"en_US.utf8"})
The name of the default locale (@pxref{Locale Names,,, libc, The GNU C
Library Reference Manual}).  @xref{Locales}, for more information.

@item @code{locale-definitions} (default: @code{%default-locale-definitions})
The list of locale definitions to be compiled and that may be used at
run time.  @xref{Locales}.

@item @code{locale-libcs} (default: @code{(list @var{glibc})})
The list of GNU@tie{}libc packages whose locale data and tools are used
to build the locale definitions.  @xref{Locales}, for compatibility
considerations that justify this option.

@item @code{name-service-switch} (default: @code{%default-nss})
Configuration of the libc name service switch (NSS)---a
@code{<name-service-switch>} object.  @xref{Name Service Switch}, for
details.

@item @code{services} (default: @code{%base-services})
A list of service objects denoting system services.  @xref{Services}.

@cindex essential services
@item @code{essential-services} (default: ...)
The list of ``essential services''---i.e., things like instances of
@code{system-service-type} and @code{host-name-service-type} (@pxref{Service
Reference}), which are derived from the operating system definition itself.
As a user you should @emph{never} need to touch this field.

@item @code{pam-services} (default: @code{(base-pam-services)})
@cindex PAM
@cindex pluggable authentication modules
Linux @dfn{pluggable authentication module} (PAM) services.
@c FIXME: Add xref to PAM services section.

@item @code{setuid-programs} (default: @code{%setuid-programs})
List of string-valued G-expressions denoting setuid programs.
@xref{Setuid Programs}.

@item @code{sudoers-file} (default: @code{%sudoers-specification})
@cindex sudoers file
The contents of the @file{/etc/sudoers} file as a file-like object
(@pxref{G-Expressions, @code{local-file} and @code{plain-file}}).

This file specifies which users can use the @command{sudo} command, what
they are allowed to do, and what privileges they may gain.  The default
is that only @code{root} and members of the @code{wheel} group may use
@code{sudo}.

@end table

@deffn {Scheme Syntax} this-operating-system
When used in the @emph{lexical scope} of an operating system field definition,
this identifier resolves to the operating system being defined.

The example below shows how to refer to the operating system being defined in
the definition of the @code{label} field:

@lisp
(use-modules (gnu) (guix))

(operating-system
  ;; ...
  (label (package-full-name
          (operating-system-kernel this-operating-system))))
@end lisp

It is an error to refer to @code{this-operating-system} outside an operating
system definition.
@end deffn

@end deftp

@node File Systems
@section File Systems

The list of file systems to be mounted is specified in the
@code{file-systems} field of the operating system declaration
(@pxref{Using the Configuration System}).  Each file system is declared
using the @code{file-system} form, like this:

@lisp
(file-system
  (mount-point "/home")
  (device "/dev/sda3")
  (type "ext4"))
@end lisp

As usual, some of the fields are mandatory---those shown in the example
above---while others can be omitted.  These are described below.

@deftp {Data Type} file-system
Objects of this type represent file systems to be mounted.  They
contain the following members:

@table @asis
@item @code{type}
This is a string specifying the type of the file system---e.g.,
@code{"ext4"}.

@item @code{mount-point}
This designates the place where the file system is to be mounted.

@item @code{device}
This names the ``source'' of the file system.  It can be one of three
things: a file system label, a file system UUID, or the name of a
@file{/dev} node.  Labels and UUIDs offer a way to refer to file
systems without having to hard-code their actual device
name@footnote{Note that, while it is tempting to use
@file{/dev/disk/by-uuid} and similar device names to achieve the same
result, this is not recommended: These special device nodes are created
by the udev daemon and may be unavailable at the time the device is
mounted.}.

@findex file-system-label
File system labels are created using the @code{file-system-label}
procedure, UUIDs are created using @code{uuid}, and @file{/dev} node are
plain strings.  Here's an example of a file system referred to by its
label, as shown by the @command{e2label} command:

@lisp
(file-system
  (mount-point "/home")
  (type "ext4")
  (device (file-system-label "my-home")))
@end lisp

@findex uuid
UUIDs are converted from their string representation (as shown by the
@command{tune2fs -l} command) using the @code{uuid} form@footnote{The
@code{uuid} form expects 16-byte UUIDs as defined in
@uref{https://tools.ietf.org/html/rfc4122, RFC@tie{}4122}.  This is the
form of UUID used by the ext2 family of file systems and others, but it
is different from ``UUIDs'' found in FAT file systems, for instance.},
like this:

@lisp
(file-system
  (mount-point "/home")
  (type "ext4")
  (device (uuid "4dab5feb-d176-45de-b287-9b0a6e4c01cb")))
@end lisp

When the source of a file system is a mapped device (@pxref{Mapped
Devices}), its @code{device} field @emph{must} refer to the mapped
device name---e.g., @file{"/dev/mapper/root-partition"}.
This is required so that
the system knows that mounting the file system depends on having the
corresponding device mapping established.

@item @code{flags} (default: @code{'()})
This is a list of symbols denoting mount flags.  Recognized flags
include @code{read-only}, @code{bind-mount}, @code{no-dev} (disallow
access to special files), @code{no-suid} (ignore setuid and setgid
bits), @code{no-atime} (do not update file access times),
@code{strict-atime} (update file access time), @code{lazy-time} (only
update time on the in-memory version of the file inode), and
@code{no-exec} (disallow program execution).
@xref{Mount-Unmount-Remount,,, libc, The GNU C Library Reference
Manual}, for more information on these flags.

@item @code{options} (default: @code{#f})
This is either @code{#f}, or a string denoting mount options passed to
the file system driver.  @xref{Mount-Unmount-Remount,,, libc, The GNU C
Library Reference Manual}, for details and run @command{man 8 mount} for
options for various file systems.  Note that the
@code{file-system-options->alist} and @code{alist->file-system-options}
procedures from @code{(gnu system file-systems)} can be used to convert
file system options given as an association list to the string
representation, and vice-versa.

@item @code{mount?} (default: @code{#t})
This value indicates whether to automatically mount the file system when
the system is brought up.  When set to @code{#f}, the file system gets
an entry in @file{/etc/fstab} (read by the @command{mount} command) but
is not automatically mounted.

@item @code{needed-for-boot?} (default: @code{#f})
This Boolean value indicates whether the file system is needed when
booting.  If that is true, then the file system is mounted when the
initial RAM disk (initrd) is loaded.  This is always the case, for
instance, for the root file system.

@item @code{check?} (default: @code{#t})
This Boolean indicates whether the file system needs to be checked for
errors before being mounted.

@item @code{create-mount-point?} (default: @code{#f})
When true, the mount point is created if it does not exist yet.

@item @code{dependencies} (default: @code{'()})
This is a list of @code{<file-system>} or @code{<mapped-device>} objects
representing file systems that must be mounted or mapped devices that
must be opened before (and unmounted or closed after) this one.

As an example, consider a hierarchy of mounts: @file{/sys/fs/cgroup} is
a dependency of @file{/sys/fs/cgroup/cpu} and
@file{/sys/fs/cgroup/memory}.

Another example is a file system that depends on a mapped device, for
example for an encrypted partition (@pxref{Mapped Devices}).
@end table
@end deftp

The @code{(gnu system file-systems)} exports the following useful
variables.

@defvr {Scheme Variable} %base-file-systems
These are essential file systems that are required on normal systems,
such as @code{%pseudo-terminal-file-system} and @code{%immutable-store} (see
below).  Operating system declarations should always contain at least
these.
@end defvr

@defvr {Scheme Variable} %pseudo-terminal-file-system
This is the file system to be mounted as @file{/dev/pts}.  It supports
@dfn{pseudo-terminals} created @i{via} @code{openpty} and similar
functions (@pxref{Pseudo-Terminals,,, libc, The GNU C Library Reference
Manual}).  Pseudo-terminals are used by terminal emulators such as
@command{xterm}.
@end defvr

@defvr {Scheme Variable} %shared-memory-file-system
This file system is mounted as @file{/dev/shm} and is used to support
memory sharing across processes (@pxref{Memory-mapped I/O,
@code{shm_open},, libc, The GNU C Library Reference Manual}).
@end defvr

@defvr {Scheme Variable} %immutable-store
This file system performs a read-only ``bind mount'' of
@file{/gnu/store}, making it read-only for all the users including
@code{root}.  This prevents against accidental modification by software
running as @code{root} or by system administrators.

The daemon itself is still able to write to the store: it remounts it
read-write in its own ``name space.''
@end defvr

@defvr {Scheme Variable} %binary-format-file-system
The @code{binfmt_misc} file system, which allows handling of arbitrary
executable file types to be delegated to user space.  This requires the
@code{binfmt.ko} kernel module to be loaded.
@end defvr

@defvr {Scheme Variable} %fuse-control-file-system
The @code{fusectl} file system, which allows unprivileged users to mount
and unmount user-space FUSE file systems.  This requires the
@code{fuse.ko} kernel module to be loaded.
@end defvr

@node Btrfs file system
@subsection Btrfs file system

The Btrfs has special features, such as subvolumes, that merit being
explained in more details.  The following section attempts to cover
basic as well as complex uses of a Btrfs file system with the Guix
System.

In its simplest usage, a Btrfs file system can be described, for
example, by:

@lisp
(file-system
  (mount-point "/home")
  (type "btrfs")
  (device (file-system-label "my-home")))
@end lisp

The example below is more complex, as it makes use of a Btrfs
subvolume, named @code{rootfs}.  The parent Btrfs file system is labeled
@code{my-btrfs-pool}, and is located on an encrypted device (hence the
dependency on @code{mapped-devices}):

@lisp
(file-system
  (device (file-system-label "my-btrfs-pool"))
  (mount-point "/")
  (type "btrfs")
  (options "subvol=rootfs")
  (dependencies mapped-devices))
@end lisp

Some bootloaders, for example GRUB, only mount a Btrfs partition at its
top level during the early boot, and rely on their configuration to
refer to the correct subvolume path within that top level.  The
bootloaders operating in this way typically produce their configuration
on a running system where the Btrfs partitions are already mounted and
where the subvolume information is readily available.  As an example,
@command{grub-mkconfig}, the configuration generator command shipped
with GRUB, reads @file{/proc/self/mountinfo} to determine the top-level
path of a subvolume.

The Guix System produces a bootloader configuration using the operating
system configuration as its sole input; it is therefore necessary to
extract the subvolume name on which @file{/gnu/store} lives (if any)